NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
GM9882 – Double handheld UHF wireless microphone
Double handheld UHF wireless microphone system with convenient ABS case for carriage. 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting. Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
Tribute L-2000
Leos L serie basser, startede som en videreførelse af hans Music Man designs, og med to Humbucker pickups tilbød G&L noget på det tidspunkt, som ikke fandtes hos MM. L serien har siden starten fået sit eget liv, og både L-2000, og L-2500 (5 str) er blevet manges favorit bas, og i høj grad en bestseller i Tribute serien.
G&L er Leo Fenders sidste livsværk, skabt på erfaringerne fra Fender og Music Man, og designet i Leo’s workshop, på Fender Avenue 2548, i Fullerton, CA. Stedet hvor de første Music Mans blev bygget, og siden alle G&L USA modeller. Den lille fabrik kører stadig på højtryk, og Leo’s værksted står, som da han forlod det. Tradition og håndværk forenet. Tribute serien er fremstillet hos Cortek i Indonesien, og anvender G&L pickups og hardware!
Multi effect pedal
32-bit AD / DA
32-bit floating-point processor and 96 kHz sampling rate
New BOSS DSP engine, specially developed for audio applications
AIRD (Augmented Impulse Response Dynamics) brings BOSS's Tube Logic concept to a digital guitar processor
Allows natural integration of external devices
Extremely dynamically playable amplifiers
Massive selection of effects including BOSS MDP effects such as DD-500, MD-500, RV-500
Amplifiers and effects can be interconnected serially and in parallel
Fast switching of patches with delay / reverb "carryover function"
Innovative stomp box features
Easy operation with a large display and 6 assignable switches
10 Footswitches, integrated freely assignable expression pedal and coloured LEDs
High-resolution tuner in 2 display modes ............
SEE INFO
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
IBIZA - PROFESSIONAL
Top: Solid Spruce
Neck:Cedar reinforce
Back & Sides: Solid Jacaranda
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent.Case
Ukulele Bass BLACK NYLON UXB810® strings are unique strings with a strong consistent sound. This synthetic core string wound with black nylon is a new revolutionary project never introduced before. It changes the way of playing the Ukulele bass, making its sound brighter and more powerful. A truly innovative string with sonority very similar to the timbre of the double bass
DIAMETER TENSION
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB811 G-1st Black Nylon wound on Synthetic core - - - -
UXB812 D-2nd Black Nylon wound on Synthetic core - - - -
UXB813 A-3rd Black Nylon wound on Synthetic core - - - -
UXB814 E-4th Black Nylon wound on Synthetic core - - - -
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
Tenore Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
100 watts RMS
12" HH Blue 1220200-4 Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
Bass (±12dB), Middle (±12dB) with four switchable voicing options, Treble (±12dB)
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
AUX in
3.5mm Stereo Headphone Jack
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Master Volume
Remote socket for optional FS-1 MINI - switches Drive
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
What's In The Box
1 x f5 Snare Microphone
3 x f2 Rack and Floor Tom Microphones
1 x f6 Kick Drum Microphone
2 x f9 Overheads Microphones
6 x DCLIP Microphone Clips
4 x DFLEX Microphone Clips
1 x MC1 Microphone Clip
Aluminum Road Case
Features
600 W RMS Class D AMP
Selectable Stereo Balanced Input
Link or Xover Balanced Stereo Output Mode
Compact and sturdy wood cabinet
Lightweight
Polarity Switch
FLAT or BOOST Mode Switch
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 42 – 124 Hz
Max SPL (1 m): 131 dB
Directivity: omnidirectional
LF: 15″
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: 28/56 bit DSP
Limiter: Peak, Thermal, RMS
Controls: Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Plywood
Grille: Full metal grid
Pole Mount: M20
Width: 430 mm (16.92 in)
Height: 580 mm (22.83 in)
Depth: 600 mm (23.62 in)
Weight: 25.5 kg (56.22 lbs)
A little over 40 years ago, largely because we could not afford to buy a high quality electric guitar, and partly because we enjoyed a challenge, my Dad and I decided to make an electric guitar. I designed an instrument from scratch, with the intention that it would have a capability beyond anything that was out there, more tunable, with a greater range of pitches and sounds, with a better tremolo, and with a capability of feeding back through the air in a "good" way - i.e. in a self-sustaining mode.
Se info
This guitar are with Brian May`s signature (autograf )
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
MAGNOLIA-PROFESSIONAL
Top:Cedar
Neck:Cedar reinforce
Back & Sides:Indian Rosewood Solid
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent Case
The Razer boasts a longer, narrow taper when compared to the Classic. This subtle difference results in an articulate, precise, picking machine. If there is a fast alternate picking line that you have played a thousand times, then you must try it with a Razer. Arpeggios and chunky rhythms are great as well for the Razer. This is Rob Chapman's pick of choice.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular Pick.
SMF600 MEDIUM
Galli® Strings - With their warm and extremely dynamic sound, impeccable intonation and great elasticity to the touch, the SUPREMA MANDOLIN STRINGS by Gallistrings allow the mandolinist to play with excellent musical phrasing, wide expressiveness and skillful agility.
Thanks to their softness, they are particularly suitable for the mandolins of the great lutherie of the past.
DIAMETER TENSION
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
SMF6001 MI / E Plain Steel - Loop End .010 0,25 17,5 7,9
SMF6002 LA /A Flat Wound .015 0,38 16,4 7,4
SMF6003 RE / D Flat Wound .022 0,54 15,0 6,8
SMF6004 SOL / G Flat Wound .033 0,84 15,4 7,
SMF500 LIGHT
Galli® Strings - With their warm and extremely dynamic sound, impeccable intonation and great elasticity to the touch, the SUPREMA MANDOLIN STRINGS by Gallistrings allow the mandolinist to play with excellent musical phrasing, wide expressiveness and skillful agility.
Thanks to their softness, they are particularly suitable for the mandolins of the great lutherie of the past.
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
SMF5001 MI / E Plain Steel - Loop End .0095 0,24 14,2 7,1
SMF5002 LA / A Flat Wound .0135 0,35 15,1 6,9
SMF5003 RE / D Flat Wound .021 0,52 14,5 6,6
SMF5004 SOL / G Flat Wound .031 0,78 13,4 6,1
System Type 2-way bass reflex speaker
Max SPL (@1m) 131 dB
Frequency Response (-10 dB) 51 Hz - 20 kHz
HF 1.75" driver
LF 12” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1500 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 359 x 610 x 350 mm (14.2" x 24" x 13.8")
Weight 21 Kg (46.3 lbs)
Vis oversættelse
24-Channel mixing console with integrated stage box and DSP
Parallel multitrack recording to USB drive & DAW
20 Mic / Line inputs: 10x XLR, 10x 6.3 mm jack combo
2 RCA line inputs
2-Channel USB media player (MP3, WAV, AIFF playback)
22-Channel USB direct-to-memory recording
32-Channel recording interface (I/O via USB-B port)
Internal sample rate: 48 kHz
2 Additional USB ports for controllers & updates
2 XLR & jack main outputs
8 XLR AUX outputs
2 Headphone outputs
RJ45 Ethernet connector
HDMI port for mixer control via a monitor
Integrated dualband WLAN & Ethernet (2 antennas, 2.4 / 5 GHz)
Compatible with iOS, Android, Windows, Mac OS, Linux (via HTML5)
Accepts up to 10 devices simultaneously (tablet, smartphone, PC)
Signal processing from dbx, Lexicon, Digitech
20 High-quality Studer designed mic preamps
SEE INFO
.REPLICATOR D’LUXE TAPE ECHO
The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making Tape delays.
It is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
40 years standing by your side
Welcome to the Bespeco world!
Established in 1981, we are an Italian Company designing, engineering, manufacturing and commercializing accessories for musical instruments.
Through constant cooperation with musicians, sound technicians and engineers we are able to build functional, sturdy and durable products, each with its own distinctive design. High quality accessories that will always come with you.
Wherever you find music, you always find an accessory: be it a cable, a guitar stand, a microphone stand, a case to protect your instrument and many more. ........
See more I (info )
We wish you a good watching!
PX1
PX1 is a multifunctional foldable music stand. Thanks to its particular design, the product is stable in any position of its use. The board can be removed and folded. This part is made of shock-resistant but flexible ABS, so that to avoid damages due to accidental falls. PX1 Music Stand is equipped with a storage compartment and two retractable holders to hang headphone and violin, cello or double bass bow. Useful also for any other proper use. In case of large music sheets, board extensions named PX1A are available as separate and optional accessories. The extensions are to be connected on the board lateral rails.
Inc. Bag
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
-t.jpg)
