Take your audience and fellow musicians by surprise with this amazing pick, the Stealth. The Stealth has the tri-tip design meaning all 3 points are identical. Very pointed and articulate. Essentially 3 picks for the price of one. When sound, accuracy and dependability matter, the Stealth becomes your secret weapon.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular Pick.
It’s not easy to reinvent forgotten technology, but after many years of research, we found the lost secrets and brought back the authentic echoes from the 1950s. It’s known for its use in David Gilmour and Hank Marvin’s guitar tones, John Bonham even used it on drums!
The Binson Echorec provides a unique and distinguishing type of echo supplied by a rotating metal drum where the audio signal is recorded through a magnetic recording head. The Four Playback heads will allow you to choose individual echoes and swells.
BINSON ECHOREC REBORN BY T-REX EFFECTS DENMARK
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
Features
600 W RMS CLASS-D AMPLIFIER
STEREO BALANCED INPUT
LINK OR X-OVER BALANCED STEREO OUTPUT MODE
COMPACT AND STURDY WOOD CABINET
LIGHTWEIGHT
POLARITY INVERSION SWITCH
FLAT OR BOOST EQ MODE SWITCH
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 46 – 123 Hz
Max SPL (1 m): 129 dB
Directivity: omnidirectional
LF: 12”
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 28/56 Bit
Limiter: Peak, Thermal, RMS
Controls:
1x Subwoofer attenuation Control
1x Flat/Boosted switch
1x Switch output mode
1x Polarity switch
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Black painted Plywood
Handles: 1 on top
Pole Mount: M20
Width: 360 mm (14.72 in)
Height: 550 mm (21.65 in)
Depth: 525 mm (20.67 in)
Weight: 19.8 Kg (43.65 lbs)
Tanglewood TU3TLCESB Thinline Folk Hybird Cutaway, Spruce Top Mahogany Back and Sides with Tanglewood TEQ QX EQ System Vintage Sunburst Satin
TU3, er en Thinline akustisk/elektrisk guitar. Den føles som en elektrisk guitar, men lyder helt rigtig til dig, som gerne vil spille akustisk, uden feedbackproblemer. Udført i lækker Satin finish, med pickup system under sadlen, som kontrolleres via Belcat EQ systemet. Et helt simpelt Volume/Bass/Treble layout, hvor du kan ”gemme” kontrollerne, når du har indstillet din lyd. Gode krom mekanikker, m/matsorte knapper, samt selvfølgelig batterilåge på bagsiden. En smuk og kompakt guitar !
Soprano Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
Ukulele Bass BLACK NYLON UXB810® strings are unique strings with a strong consistent sound. This synthetic core string wound with black nylon is a new revolutionary project never introduced before. It changes the way of playing the Ukulele bass, making its sound brighter and more powerful. A truly innovative string with sonority very similar to the timbre of the double bass
DIAMETER TENSION
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB811 G-1st Black Nylon wound on Synthetic core - - - -
UXB812 D-2nd Black Nylon wound on Synthetic core - - - -
UXB813 A-3rd Black Nylon wound on Synthetic core - - - -
UXB814 E-4th Black Nylon wound on Synthetic core - - - -
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
The Tripp is the most versatile pick that Gravity sells. Using the tri-tip model platform, we’ve put a different tip on each end from three of our popular picks. The Tripp has one tip that’s sharp like the Sunrise, giving you the ability to pick or shred, a second tip that’s rounded like the Axis, made for some smooth strumming, and a third tip that is semi-pointed/semi-rounded like the Striker, giving you the versatility to alternate from picking to strumming to any style you play. With this pick you have everything. Not only do you get the ability and option to play different styles, this pick gives you different tones and sounds — from bright, higher frequencies to mid-range tones. You can call it a bargain pick or a great practice tool, but one thing is for sure, the Tripp sounds as good as it looks.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
See more INFO
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
AURORA - PROFESSIONAL
Back/Sides: Solid Madagascar Rosewood
Top Solid special Cedar
Fingerboard: Gabon ebony
Neck: Cedar Special
Bridge: Amazonas rosewood
Rosette: Wood mosaic
Bindings: cocobolo
Headplate: Madagascar
Tuners: Gottoh
Finish: High gloss
Scale: 650mm
Active high-performance column PA system
1" Compression driver with CD horn
6x 3" Centre speaker
10" Long excursion sub-woofer
Power: 2000 Watt
Class D power amplifier
Maximum level: 126 dB Peak
Frequency response +/- 10 dB: 38 - 20,000 Hz
Horn characteristic: 120° x 30°
24-Bit DSP with storable 5 User Presets: Mode, Master EQ,Delay, Display, Bluetooth
Modes: 3 Basic settings for Music, Voice and DJ
System delay adjustable
Illuminated LC display
4 Channel mixer
2 Switchable mic/line inputs: XLR/jack combo
1 HiZ instrument input
1 RCA stereo input
1 XLR mix output
Bluetooth 5.0 for audio streaming
Variable column construction with or without spacer element
Sub-woofer cabinet made of birch/multiplex wood
Bass dimensions (W x H x D): 36.6 x 62.5 x 54.1 cm
Bass weight: 21 kg
Dimensions of top/spacer (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of top: 3.9 kg
Weight of spacer: 2 kg
Total height: 2.13 m
Total weight 26.9 kg
40 years standing by your side
Welcome to the Bespeco world!
Established in 1981, we are an Italian Company designing, engineering, manufacturing and commercializing accessories for musical instruments.
Through constant cooperation with musicians, sound technicians and engineers we are able to build functional, sturdy and durable products, each with its own distinctive design. High quality accessories that will always come with you.
Wherever you find music, you always find an accessory: be it a cable, a guitar stand, a microphone stand, a case to protect your instrument and many more. ........
See more I (info )
We wish you a good watching!
System Type Vented stereo sub
Max SPL (@1m) 130 dB
Frequency Response (-10 dB) 45 Hz - Cut freq
LF 15” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 430 x 580 x 590 mm (16.9" x 22.8" x 23.2")
Weight 31.9 kg (70.32 lbs)
TYPE 5 String G Banjo
TUNING G, D, G, B, D
BRACKETS 18
RESONATOR Maple
SIDES Maple
FINGERBOARD Techwood
BRIDGE Maple with Ebony tip
HEAD Remo Ivory
FINISH Natural Gloss
SPIN-TONE 400
Spin-Tone 400 is our 3-way amplifier equipped with 2 speakers with woofer and tweeter for rotary or stationary effect and a rotating driver, specifically designed to reproduce the original rotary horn amplifiers. The Spin-Tone 400 (400W), with its 23,5 kg, is the most portable solution for gigs and the perfect amp to connect to your Legend Soul, or any other instrument of our line and not, bringing that vintage touch that will make the difference.
Se Info
Active speaker
Loudspeakers: 12"/1"
Digital power amplifier
Power: 1200 W peak, 600 W RMS
Peak SPL: 129 dB
Asymmetrical horn tweeter 100° x85°
XLR and 6.3 jack input
56-Bit DSP
8 Sound presets for the monitor and stand application
2 Separately adjustable inputs with mix output
Multifunctional housing incl. slanted monitor angle
3x M10 rigging points
Dimensions: 350 x 642 x 349 mm
Weight: 14.3 kg
Samme følelse af de originale tonehjul i orgelens pedal . Den er bare kortere og lettere. Der er kun 18 noter. Perfekt til giggins musikere. Volume pedal medfølger.
1 strømforsyning er inkluderet. Men hvis du spiller det med en Legend eller en Legend Live, behøver du ikke det, pedalboardet er drevet via midi-kabel.
Pedalboard 18 er en MIDI pedalboard, du kan bruge den med andre mærker, med MIDI instrumenter.
.REPLICATOR D’LUXE TAPE ECHO
The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making Tape delays.
It is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.
Mikrofon kabel 6,0 meter XLR - XLR
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
SMF600 MEDIUM
Galli® Strings - With their warm and extremely dynamic sound, impeccable intonation and great elasticity to the touch, the SUPREMA MANDOLIN STRINGS by Gallistrings allow the mandolinist to play with excellent musical phrasing, wide expressiveness and skillful agility.
Thanks to their softness, they are particularly suitable for the mandolins of the great lutherie of the past.
DIAMETER TENSION
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
SMF6001 MI / E Plain Steel - Loop End .010 0,25 17,5 7,9
SMF6002 LA /A Flat Wound .015 0,38 16,4 7,4
SMF6003 RE / D Flat Wound .022 0,54 15,0 6,8
SMF6004 SOL / G Flat Wound .033 0,84 15,4 7,
The Pickport Studio is a specialized pick holder for all acoustic, electric and bass guitars. The Pickport Studio has been designed to mount to strap buttons, volume knobs, tone knobs, machine heads, pick guards and even Stratocaster jack plates. The Pickport is sturdy, flexible, decorative and can easily mount on your ax for as long as you wish.
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
