Features
600 W RMS CLASS-D AMPLIFIER
STEREO BALANCED INPUT
LINK OR X-OVER BALANCED STEREO OUTPUT MODE
COMPACT AND STURDY WOOD CABINET
LIGHTWEIGHT
POLARITY INVERSION SWITCH
FLAT OR BOOST EQ MODE SWITCH
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 46 – 123 Hz
Max SPL (1 m): 129 dB
Directivity: omnidirectional
LF: 12”
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 28/56 Bit
Limiter: Peak, Thermal, RMS
Controls:
1x Subwoofer attenuation Control
1x Flat/Boosted switch
1x Switch output mode
1x Polarity switch
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Black painted Plywood
Handles: 1 on top
Pole Mount: M20
Width: 360 mm (14.72 in)
Height: 550 mm (21.65 in)
Depth: 525 mm (20.67 in)
Weight: 19.8 Kg (43.65 lbs)
"Some guitarists think of the USA as the only source of quality electric guitars, and for the most part they are correct. However, there are many of us who remember the superb range of guitars designed and made by BURNS GUITARS, a British company.
Ser.No: 06
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Multi effect pedal
32-bit AD / DA
32-bit floating-point processor and 96 kHz sampling rate
New BOSS DSP engine, specially developed for audio applications
AIRD (Augmented Impulse Response Dynamics) brings BOSS's Tube Logic concept to a digital guitar processor
Allows natural integration of external devices
Extremely dynamically playable amplifiers
Massive selection of effects including BOSS MDP effects such as DD-500, MD-500, RV-500
Amplifiers and effects can be interconnected serially and in parallel
Fast switching of patches with delay / reverb "carryover function"
Innovative stomp box features
Easy operation with a large display and 6 assignable switches
10 Footswitches, integrated freely assignable expression pedal and coloured LEDs
High-resolution tuner in 2 display modes ............
SEE INFO
Tribute L-2000
Leos L serie basser, startede som en videreførelse af hans Music Man designs, og med to Humbucker pickups tilbød G&L noget på det tidspunkt, som ikke fandtes hos MM. L serien har siden starten fået sit eget liv, og både L-2000, og L-2500 (5 str) er blevet manges favorit bas, og i høj grad en bestseller i Tribute serien.
G&L er Leo Fenders sidste livsværk, skabt på erfaringerne fra Fender og Music Man, og designet i Leo’s workshop, på Fender Avenue 2548, i Fullerton, CA. Stedet hvor de første Music Mans blev bygget, og siden alle G&L USA modeller. Den lille fabrik kører stadig på højtryk, og Leo’s værksted står, som da han forlod det. Tradition og håndværk forenet. Tribute serien er fremstillet hos Cortek i Indonesien, og anvender G&L pickups og hardware!
Legend
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
100 watts RMS
12" HH Blue 1220200-4 Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
Bass (±12dB), Middle (±12dB) with four switchable voicing options, Treble (±12dB)
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
AUX in
3.5mm Stereo Headphone Jack
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Master Volume
Remote socket for optional FS-1 MINI - switches Drive
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass.
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
Legend Exp
If you want the fabulous Legend sound powered by the physical TMT modeling technology, Legend Exp module is the perfect solution for you.
The control panel offers a wide range of buttons and knobs including a series of drawbars that allow you to fully control in real time the extensive features offered by the instrument.
Den talentfulde italienske designer Pagelli har arbejdet tæt sammen med Burns® London for at skabe et unikt nyt design. Den nye Jet-Sonic® oser moderne retro chic med smukke kurver og en virkelig individuel stil. Alle komponenter og materialer, der er brugt, er af høj kvalitet. Burns® er kendt for, og vores musikere er kommet til at forvente. Lyden er virkelig ude af denne verden - vi tror, at Jet-Sonic ™ skal flyve
The Tripp is the most versatile pick that Gravity sells. Using the tri-tip model platform, we’ve put a different tip on each end from three of our popular picks. The Tripp has one tip that’s sharp like the Sunrise, giving you the ability to pick or shred, a second tip that’s rounded like the Axis, made for some smooth strumming, and a third tip that is semi-pointed/semi-rounded like the Striker, giving you the versatility to alternate from picking to strumming to any style you play. With this pick you have everything. Not only do you get the ability and option to play different styles, this pick gives you different tones and sounds — from bright, higher frequencies to mid-range tones. You can call it a bargain pick or a great practice tool, but one thing is for sure, the Tripp sounds as good as it looks.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
See more INFO
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
Tenore Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
System Type 2-way bass reflex speaker
Max SPL (@1m) 132 dB
Frequency Response (-10 dB) 48 Hz - 20 kHz
HF 1.75" driver
LF 15” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1450 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 427 x 705 x 428 mm (16.8" x 27.8" x 16.9")
Weight 25.9 Kg (57 lbs)
Hiwatt is the classic British guitar amplifier that musicians have counted on, both in the studio and on the road, year after year. Built by hand in England, every amplifier is soak-tested before it leaves the factory to serve a new generation of musicians.
Kicking off in the late 1960s, under the guidance of Dave Reeves, Hiwatt gave Marshall a run for their money, contributing hugely to the sonic landscape that became know as ‘The British Sound’. With artists such as The Who and Pink Floyd, the brand was at the forefront of guitar amplification for the remainder of the 1960s and much of the 1970s. Reeves’ untimely death and severe licensing problems threw the trade mark into the doldrums for much of the next two decades.
Hiwatt’s second coming arrived once new trademark owners took control, pursuing an aggressive marketing policy during the present century. This has been proven, with artists such as U2, Oasis, Coldplay and The Black Keys
Specifications
.500" medium large bore
8" bell
Chrome plated nickel silver inner slides
Lacquered brass finish
2C Blessing mouthpiece
Plush lined hard-shell molded case (C-128)
Made in Usa !
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
It’s not easy to reinvent forgotten technology, but after many years of research, we found the lost secrets and brought back the authentic echoes from the 1950s. It’s known for its use in David Gilmour and Hank Marvin’s guitar tones, John Bonham even used it on drums!
The Binson Echorec provides a unique and distinguishing type of echo supplied by a rotating metal drum where the audio signal is recorded through a magnetic recording head. The Four Playback heads will allow you to choose individual echoes and swells.
BINSON ECHOREC REBORN BY T-REX EFFECTS DENMARK
1-EFFEKT PEDALER
-t.jpg)
