System Type 2-way bass reflex speaker
Max SPL (@1m) 132 dB
Frequency Response (-10 dB) 48 Hz - 20 kHz
HF 1.75" driver
LF 15” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1450 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 427 x 705 x 428 mm (16.8" x 27.8" x 16.9")
Weight 25.9 Kg (57 lbs)
A New Dimension of Sound and Space in a Majestic Console caracterized by unsurpassed elegance and refinement : this is the Ouverture 355.
Mastercrafted French Terraced Console,
AcuSphere dimensional reverb – recreates the acoustics of large cathedrals and concert halls with stunning realism,
Enhanced 10.2 Surround System – experience a fully immersive sound field through 14 speakers,
Comprehensive Internal Library Of Organ
Stops ,
DANTE Audio Over Ethernet (option).
The design of the Ouverture line was inspired by the beautiful terraced consoles built by Aristide Cavaille-Coll, the renowned French organ builder of the nineteenth century.
GUITAR POLISH
D’Andrea USA’s Guitar Polish works best after a deep clean with our Lemon Oil & Conditioner. Lightly spray an even coat of polish over your guitar body and gently polish with a polishing cloth until a deep gloss appears. Keep your instruments in tip-top shape with our professional line of Guitar Care Products. Proudly Made in USA!
GM9882H – Double headset UHF wireless microphone
Double headset UHF wireless microphone system with convenient ABS case for carriage. 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting. Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
A single module for two synths! The FM Module for Legend ’70s gives you two layers of authentic FM synthesis and a selection of sounds from music history.
You can import DX-TX sounds from the available libraries. You will also have an FM synthesis editor to experiment with!
FM SYNTH MODULE
2 Layers of Stereo FM Synthesis totally independent
6 Operators
LFO and Pitch Envelope exactly as in the historical formulation of FM synthesis
Iconic Sounds of the Decades
Compatibility with DX-TX sounds from the libraries available
SEE MORE INFO
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Features
600 W RMS CLASS-D AMPLIFIER
STEREO BALANCED INPUT
LINK OR X-OVER BALANCED STEREO OUTPUT MODE
COMPACT AND STURDY WOOD CABINET
LIGHTWEIGHT
POLARITY INVERSION SWITCH
FLAT OR BOOST EQ MODE SWITCH
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 46 – 123 Hz
Max SPL (1 m): 129 dB
Directivity: omnidirectional
LF: 12”
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 28/56 Bit
Limiter: Peak, Thermal, RMS
Controls:
1x Subwoofer attenuation Control
1x Flat/Boosted switch
1x Switch output mode
1x Polarity switch
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Black painted Plywood
Handles: 1 on top
Pole Mount: M20
Width: 360 mm (14.72 in)
Height: 550 mm (21.65 in)
Depth: 525 mm (20.67 in)
Weight: 19.8 Kg (43.65 lbs)
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
MAGNOLIA-PROFESSIONAL
Top:Cedar
Neck:Cedar reinforce
Back & Sides:Indian Rosewood Solid
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent Case
LEGEND SOUL ORGANS
Legend Soul line is born thanks to the Viscount centennial experience in projecting and making instruments. Our purpose was creating new digital tonewheels organs able to reproduce the original and iconic 9 contacts effect as much realistic as possible. After several studies, our engineers have managed to perfectly recreate all of them, using a unique technology patented by us. Thanks to that, when you play one of our Legend Soul, you will feel the iconic and realistic sounds of original tonewheels organ, but with all the advantages of the digital ones.
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
SPIN-TONE 400
Spin-Tone 400 is our 3-way amplifier equipped with 2 speakers with woofer and tweeter for rotary or stationary effect and a rotating driver, specifically designed to reproduce the original rotary horn amplifiers. The Spin-Tone 400 (400W), with its 23,5 kg, is the most portable solution for gigs and the perfect amp to connect to your Legend Soul, or any other instrument of our line and not, bringing that vintage touch that will make the difference.
Se Info
T-REX CREAMER REVERB
CREAMER - MAJOR REVERB
So, you finally got your rig dialed in and it sounds fantastic, but sometimes you feel like adding a bit of depth or airy-ness to it. You want to fill in the holes in your playing, add some ambience or you maybe just really like those dreamy, special sounds that seem to take on a life of their own.
HOWEVER, you don´t want to be lost in sub-menus or unfamiliar parameters, your pedal board is pretty much packed with all your precious goodies and you don´t want to ruin that tone you finally nailed.
We have designed the Creamer reverb to be dead simple to operate, but with just enough room for tweaking, so you don´t feel limited in your search for the sonic equivalent of Grand Canyon or that small room we frequently visit every day.
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Vis oversættelse
24-Channel mixing console with integrated stage box and DSP
Parallel multitrack recording to USB drive & DAW
20 Mic / Line inputs: 10x XLR, 10x 6.3 mm jack combo
2 RCA line inputs
2-Channel USB media player (MP3, WAV, AIFF playback)
22-Channel USB direct-to-memory recording
32-Channel recording interface (I/O via USB-B port)
Internal sample rate: 48 kHz
2 Additional USB ports for controllers & updates
2 XLR & jack main outputs
8 XLR AUX outputs
2 Headphone outputs
RJ45 Ethernet connector
HDMI port for mixer control via a monitor
Integrated dualband WLAN & Ethernet (2 antennas, 2.4 / 5 GHz)
Compatible with iOS, Android, Windows, Mac OS, Linux (via HTML5)
Accepts up to 10 devices simultaneously (tablet, smartphone, PC)
Signal processing from dbx, Lexicon, Digitech
20 High-quality Studer designed mic preamps
SEE INFO
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
IBIZA - PROFESSIONAL
Top: Solid Spruce
Neck:Cedar reinforce
Back & Sides: Solid Jacaranda
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent.Case
Another pick with the tri-tip design, the Axis is shaped with very rounded tips, making it a favorite for strumming styles and mandolin players. The wide body gives your fingers additional gripping surface, ensuring the pick stays in your hands even during aggressive play. Also, the identical tips frees you from worrying about the pick turning in your hands since there’s another tip waiting to take over right around the corner. These features makes the Axis a dependable pick for the soft strummer or "banger's" alike.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular
VISCOUNT HURRICANE 210 STEREO POWERED LOUDSPEAKER BY KEYB, PROVIDES YOU THE PERFECT PORTABLE AMPLIFICATION SOLUTION FOR LEGEND ORGANS
EXPRESSLY DESIGNED IN COOPERATION WITH PROFESSIONAL PLAYERS
SELF-POWERED SPEAKER FEATURES WITH FOUR CLASS D AMPLIFIERS
THE SPECIAL SPEAKERS PLACEMENT ENHANCES THE ORGAN'S INTERNAL ROTARY EMULATION
OUTSTANDING SOUND QUALITY HIGH SOUND PRESSURE LEVEL AND LINEAR FREQUENCY RESPONSE
ON-BOARD USEFULL EQUALIZER
STATE-OF-THE ART ELECTROACOUSTIC COMPONENTS
COMPACT AND LIGHTWEIGHT DESIGN
Revolutionary Sound Engine
At the core of the Legend One series is the Legend Soul Engine, powered by Viscount's proprietary TMT (Tonewheel Modeling Technology) and HDS (High-Definition Sampling). These technologies provide authentic organ tones, including detailed recreations of iconic models such as the B3 (1938), C3 (1955), A100 (1961), and more. The 91 tonewheels offer rich polyphony and realistic harmonic detail, capturing the essence of classic tonewheel organs.See more Info
Entertainer Keyboard
61 Semi-weighted, velocity-sensitive keys with aftertouch
464 Voices with 3 different sounds each
62 Drum kits and 580 live drums
Dual/Layer
Split
Over 400 styles
4 Nanks with unlimited registrations each
216-Voice polyphonic
7" Touch screen display
15 Sliders with LED indicator
8 Pots
Pitch bend and modulation wheel
Audio and MIDI recording
Audio player with 5+1 multitracks
2 Separate players
Effects: DSP (reverb, chorus, flanger, overdrive, distortion, tremolo, autopan, equaliser, etc.)
3-Voice vocalist for mic input 1
240 GB SSD (80 GB for system)
SD card slot (up to 512 GB)
1 GB user sample memory
Bluetooth audio input
WiFi network connection to Ketron app
Dimensions (W x D x H): 925 x 365 x 125 mm
Made famous by the Gretch White Falcon, this stunning guitar with abalone inlay and gold effect hardware is second to none. Comes with dual filtertrons, licensed Bigsby and gold effect hardware! 648mm scaling. Maple neck and rosewood fingerboard and bridge finish the guitar of nicely.
It’s not easy to reinvent forgotten technology, but after many years of research, we found the lost secrets and brought back the authentic echoes from the 1950s. It’s known for its use in David Gilmour and Hank Marvin’s guitar tones, John Bonham even used it on drums!
The Binson Echorec provides a unique and distinguishing type of echo supplied by a rotating metal drum where the audio signal is recorded through a magnetic recording head. The Four Playback heads will allow you to choose individual echoes and swells.
BINSON ECHOREC REBORN BY T-REX EFFECTS DENMARK
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
1-EFFEKT PEDALER
-t.jpg)
