Features
600 W RMS CLASS-D AMPLIFIER
STEREO BALANCED INPUT
LINK OR X-OVER BALANCED STEREO OUTPUT MODE
COMPACT AND STURDY WOOD CABINET
LIGHTWEIGHT
POLARITY INVERSION SWITCH
FLAT OR BOOST EQ MODE SWITCH
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 46 – 123 Hz
Max SPL (1 m): 129 dB
Directivity: omnidirectional
LF: 12”
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 28/56 Bit
Limiter: Peak, Thermal, RMS
Controls:
1x Subwoofer attenuation Control
1x Flat/Boosted switch
1x Switch output mode
1x Polarity switch
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Black painted Plywood
Handles: 1 on top
Pole Mount: M20
Width: 360 mm (14.72 in)
Height: 550 mm (21.65 in)
Depth: 525 mm (20.67 in)
Weight: 19.8 Kg (43.65 lbs)
NYHED!
ISA C8X
26-in, 28-out USB-C audio interface
BESKRIVELSE SPECIFIKATION
ISA C8X combines the trademark ISA sound with comprehensive remote control and all the analogue and digital I/O, routing, and recallability you need to run your entire setup. The two ISA preamps are based on classic Lundahl transformers and feature all-analogue Console and 430 Air modes for new tonal options plus switchable impedance, balanced inserts, and high-pass filtering. All eight of ISA C8X’s preamps are fully controllable from the front panel and via the Focusrite Control 2 software.
2U rack-mounted, 26x28 USB audio interface
Capture, route, and mix sessions of any size with 26 inputs and 28 outputs of analogue and digital audio.
Two remote-controllable ISA preamps
Featuring Lundahl LL1538 input transformers that add subtle warmth and body to any signal, plus balanced inserts, stepped and fine gain control, switchable impedance, high-pass filter, and up to 79dB of gain.
SoloStrap
Three styles. Two-tone. One amazing strap.
Drawn from the proven comfort, quality and unique construction of the DuoStrap Signature, the SoloStrap was designed for the most discerning guitarists and bassists. Using only the finest of leather hides from Europe, Canada, and South America, the SoloStrap is meticulously hand-crafted to create a blend of form and function that begs to be worn and shown off. The resilient contour padding wrapped with a beautiful vegetable-tanned leather top and an anti-slip suede bottom creates a lasting personal fit, with soft-rolled padded sides where it matters, and topped handsomely with our distinct stamped cover and antique-finished branded metal rivets.
Three gorgeous two-tone color combinations to choose from, with lengths adjustable from 38" to 50" and an extra-long option that brings the total usable length to 62". Padded area is 3.25" wide for excellent weight distribution and superior comfort.
The Pickport Studio is a specialized pick holder for all acoustic, electric and bass guitars. The Pickport Studio has been designed to mount to strap buttons, volume knobs, tone knobs, machine heads, pick guards and even Stratocaster jack plates. The Pickport is sturdy, flexible, decorative and can easily mount on your ax for as long as you wish.
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
GUITAR POLISH
D’Andrea USA’s Guitar Polish works best after a deep clean with our Lemon Oil & Conditioner. Lightly spray an even coat of polish over your guitar body and gently polish with a polishing cloth until a deep gloss appears. Keep your instruments in tip-top shape with our professional line of Guitar Care Products. Proudly Made in USA!
IK Multimedia ARC ON•EAR
Neutral frekvensrespons: ARC ON· EAR bruger præcist målte kalibreringsprofiler til hundredvis af hovedtelefonmodeller. Du får en gennemsigtig lyd, der sikrer et mix, der er klart, afbalanceret og virkelighedstro.
Naturligt stereobillede: I modsætning til plug-ins er ARC ON· EAR avanceret fysisk modellering for at genskabe lyden og adfærden fra rigtige studiemonitorer i et akustisk perfekt kontrolrum. Du får en naturlig fornemmelse af dybde og bredde lige i dine hovedtelefoner!
Med 32-bit ESS SABRE-konvertering®, høj dæmpningsfaktor og ultralav forvrængning får du en lytteoplevelse på audiofil-niveau.
B115 is a versatile, portable full range active speaker suitable for applications in medium to large venues. The bass-reflex cabinet is equipped with a 15 woofer and a 1.35 compression driver boosted by a 1200 W Class D amp module
Electric Bass
Body: Alder
Maple neck
Pau Ferro fretboard
Matte neck finish
20 Frets
Nut width: 41.3 mm
Scale: 864 mm
Pickups: New Player AlNiCo V Precision Split single coil
Volume knob and tone knob
Standard open gear machine heads
Ex-factory stringing: Fender 7250M .045 - .105
Colour: 3-Tone sunburst
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
Samme følelse af de originale tonehjul i orgelens pedal . Den er bare kortere og lettere. Der er kun 18 noter. Perfekt til giggins musikere. Volume pedal medfølger.
1 strømforsyning er inkluderet. Men hvis du spiller det med en Legend eller en Legend Live, behøver du ikke det, pedalboardet er drevet via midi-kabel.
Pedalboard 18 er en MIDI pedalboard, du kan bruge den med andre mærker, med MIDI instrumenter.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
.REPLICATOR D’LUXE TAPE ECHO
The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making Tape delays.
It is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.
50 watts RMS
10" HH AUDIO Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
3-Band EQ
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
3.5mm AUX in
3.5mm Stereo Headphone Jack
DIGBETH styling
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
Concerto Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
100 watts RMS
12" HH Blue 1220200-4 Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
Bass (±12dB), Middle (±12dB) with four switchable voicing options, Treble (±12dB)
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
AUX in
3.5mm Stereo Headphone Jack
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Master Volume
Remote socket for optional FS-1 MINI - switches Drive
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
A little over 40 years ago, largely because we could not afford to buy a high quality electric guitar, and partly because we enjoyed a challenge, my Dad and I decided to make an electric guitar. I designed an instrument from scratch, with the intention that it would have a capability beyond anything that was out there, more tunable, with a greater range of pitches and sounds, with a better tremolo, and with a capability of feeding back through the air in a "good" way - i.e. in a self-sustaining mode.
Se info
This guitar are with Brian May`s signature (autograf )
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass. 5 strings
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
-t.jpg)
-t.jpg)
