Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass.
System Type Vented stereo sub
Max SPL (@1m) 130 dB
Frequency Response (-10 dB) 45 Hz - Cut freq
LF 15” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 430 x 580 x 590 mm (16.9" x 22.8" x 23.2")
Weight 31.9 kg (70.32 lbs)
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
System Type 2-way bass reflex speaker
Max SPL (@1m) 131 dB
Frequency Response (-10 dB) 51 Hz - 20 kHz
HF 1.75" driver
LF 12” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1500 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 359 x 610 x 350 mm (14.2" x 24" x 13.8")
Weight 21 Kg (46.3 lbs)
40 years standing by your side
Welcome to the Bespeco world!
Established in 1981, we are an Italian Company designing, engineering, manufacturing and commercializing accessories for musical instruments.
Through constant cooperation with musicians, sound technicians and engineers we are able to build functional, sturdy and durable products, each with its own distinctive design. High quality accessories that will always come with you.
Wherever you find music, you always find an accessory: be it a cable, a guitar stand, a microphone stand, a case to protect your instrument and many more. ........
See more I (info )
We wish you a good watching!
Another pick with the tri-tip design, the Axis is shaped with very rounded tips, making it a favorite for strumming styles and mandolin players. The wide body gives your fingers additional gripping surface, ensuring the pick stays in your hands even during aggressive play. Also, the identical tips frees you from worrying about the pick turning in your hands since there’s another tip waiting to take over right around the corner. These features makes the Axis a dependable pick for the soft strummer or "banger's" alike.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular
The Edge is made to take your playing to that next level. This pick features an extremely sharp point with rounded shoulders, but unlike the Classic shape, the Edge has an extra-wide body for a dependable grip during even the most aggressive playing. The Edge gives you a more accurate and articulate sound with better pinch harmonics. Great for all types of picking, from alternate to sweeping, the Edge is made for ultimate accuracy and sound. While it can be played on any guitar, the Edge is designed to bring out the most out of your electric guitar.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
A single module for two synths! The FM Module for Legend ’70s gives you two layers of authentic FM synthesis and a selection of sounds from music history.
You can import DX-TX sounds from the available libraries. You will also have an FM synthesis editor to experiment with!
FM SYNTH MODULE
2 Layers of Stereo FM Synthesis totally independent
6 Operators
LFO and Pitch Envelope exactly as in the historical formulation of FM synthesis
Iconic Sounds of the Decades
Compatibility with DX-TX sounds from the libraries available
SEE MORE INFO
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
B112 is a versatile, portable, powerful active speaker suitable for applications in medium venues. The bass-reflex cabinet is equipped with a 12 woofer and a 1.35 compression driver boosted by a 1200 W Class D amp module.
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
Den talentfulde italienske designer Pagelli har arbejdet tæt sammen med Burns® London for at skabe et unikt nyt design. Den nye Jet-Sonic® oser moderne retro chic med smukke kurver og en virkelig individuel stil. Alle komponenter og materialer, der er brugt, er af høj kvalitet. Burns® er kendt for, og vores musikere er kommet til at forvente. Lyden er virkelig ude af denne verden - vi tror, at Jet-Sonic ™ skal flyve
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
Burns 50-årsdagen alle Gold Dream-modeller er en speciel model, der er produceret for at fejre 50 års Burns London (1960 til 2010).
Kun 50 stk. Worldwide vil blive lavet af denne 50-årige model som en strengt begrænset udgave. Den har et håndtegnet og nummereret ægthedscertifikat og har de nye Rez-o-Matik® Noiseless ENR-pickups.
Krop og matchende hals i guld metallisk
Ebony Fingerboard med skildpadde kant bindende
22 frets
Gold Hardware med 50 års jubilæum gravering
Låse maskine hoveder
Guld effekt pick-guards
Rez-o-Matik lydløse ENR pickups
Skub pull pickup controls
5-vejs vælgerkontakt
Master volumen
3 x tonekontrol
Låsemøtrikker
Monteret sag
Ægthedscertifikat
Ser.No: 21
SHAPE Super Folk
TOP Solid Spruce or Solid Cedar
BACK Amara/Spalt Mango
SIDES Amara
FINGERBOARD Techwood
BRIDGE Techwood
STRINGS Elixir Nanoweb 12-53
ELECTRONICS Fishman Presys
FINISH Natural Gloss
Full Specification TWJSFCE
GUITAR POLISH
D’Andrea USA’s Guitar Polish works best after a deep clean with our Lemon Oil & Conditioner. Lightly spray an even coat of polish over your guitar body and gently polish with a polishing cloth until a deep gloss appears. Keep your instruments in tip-top shape with our professional line of Guitar Care Products. Proudly Made in USA!
2 MUDHONEYS IN 1 - DUAL DISTORTION
If you still haven’t heard a T-Rex Mudhoney, do yourself a favour and plug one in next time you’re at the music store.
Dirty and sweet, this classic dual distortion pedal has been praised for its amazing tonal range and ability to deliver everything from a smooth dirty edge to a harrowing wall of distorted sound. It’s one of first pedals we produced, and it set the standard for many T-Rex pedals to come.
Everything that is great about the original Mudhoney – and then doubles it! With two channels of vintage gain, you can easily switch between a clean sound from your amp, a nice edgy overdrive from the one Mudhoney channel and a thick warm distortion from the other channel – delivering deliciously dirty T-Rex tone all the way.
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
KALA FLATWOUND 4-STRING SET BY GALLISTRINGS
Chrome steel wrapped around a nylon core, the U•BASS® Flatwound 4-String Set by Gallistrings enables fast and stable intonation, bringing a warmth and consistency to your U•BASS® like never before.
These high-tension U•BASS® strings offer a timbre and maneuverability akin to the double bass. Smooth to the touch, the chrome flatwound tape allows your fingers to glide around the fretboard and helps protect the neck from wear and tear—perfect for any acoustic fretted or fretless U•BASS®. Scale length cm 52 - in. 20,5"
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB911C G-1st Chrome Steel on Nylon core .060 1.52 - -
UXB912C D-2nd Chrome Steel on Nylon core .080 2.03 - -
UXB913C A-3rd Chrome Steel on Nylon core .100 2.54 - -
UXB914C E-4th Chrome Steel on Nylon core .130 3.30 - -
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
1-EFFEKT PEDALER
-t.jpg)
