The Galli Musical Strings Company was established by Tommaso Galli in 1890. At that time musical strings were handcrafted using gut.
In 1950 Roberto Galli, Tommaso’s son, joined the firm. Roberto inherited the talent of his father and in time became like his father a great expert, a maestro, in the art of musical string making.
In the 1970s Galli Strings introduced new technologically advanced equipment into their production process. Roberto Galli’s son, Tommaso, joined the company in 1985. Building on his grandfather’s and father’s musical and technical achievements, Tommaso Galli has extended into the twenty-first century the Galli tradition of developing and manufacturing fine musical strings.
Burns 50-årsdagen alle Gold Dream-modeller er en speciel model, der er produceret for at fejre 50 års Burns London (1960 til 2010).
Kun 50 stk. Worldwide vil blive lavet af denne 50-årige model som en strengt begrænset udgave. Den har et håndtegnet og nummereret ægthedscertifikat og har de nye Rez-o-Matik® Noiseless ENR-pickups.
Krop og matchende hals i guld metallisk
Ebony Fingerboard med skildpadde kant bindende
22 frets
Gold Hardware med 50 års jubilæum gravering
Låse maskine hoveder
Guld effekt pick-guards
Rez-o-Matik lydløse ENR pickups
Skub pull pickup controls
5-vejs vælgerkontakt
Master volumen
3 x tonekontrol
Låsemøtrikker
Monteret sag
Ægthedscertifikat
Ser.No: 21
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
Revolutionary Sound Engine
At the core of the Legend One series is the Legend Soul Engine, powered by Viscount's proprietary TMT (Tonewheel Modeling Technology) and HDS (High-Definition Sampling). These technologies provide authentic organ tones, including detailed recreations of iconic models such as the B3 (1938), C3 (1955), A100 (1961), and more. The 91 tonewheels offer rich polyphony and realistic harmonic detail, capturing the essence of classic tonewheel organs.See more Info
SPIN-TONE 400
Spin-Tone 400 is our 3-way amplifier equipped with 2 speakers with woofer and tweeter for rotary or stationary effect and a rotating driver, specifically designed to reproduce the original rotary horn amplifiers. The Spin-Tone 400 (400W), with its 23,5 kg, is the most portable solution for gigs and the perfect amp to connect to your Legend Soul, or any other instrument of our line and not, bringing that vintage touch that will make the difference.
Se Info
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Transporttaske og vogn
Til Viscount Legend og Legend Soul 273 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 117,5 x 59 x 20 cm
Udvendige mål (B x H x D): 130,5 x 65 x 26 cm
Vægt: 10,7 kg
System Type Vented stereo sub
Max SPL (@1m) 130 dB
Frequency Response (-10 dB) 45 Hz - Cut freq
LF 15” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 430 x 580 x 590 mm (16.9" x 22.8" x 23.2")
Weight 31.9 kg (70.32 lbs)
Mikrofon kabel 9,0 meter XLR - XLR
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
SMF500 LIGHT
Galli® Strings - With their warm and extremely dynamic sound, impeccable intonation and great elasticity to the touch, the SUPREMA MANDOLIN STRINGS by Gallistrings allow the mandolinist to play with excellent musical phrasing, wide expressiveness and skillful agility.
Thanks to their softness, they are particularly suitable for the mandolins of the great lutherie of the past.
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
SMF5001 MI / E Plain Steel - Loop End .0095 0,24 14,2 7,1
SMF5002 LA / A Flat Wound .0135 0,35 15,1 6,9
SMF5003 RE / D Flat Wound .021 0,52 14,5 6,6
SMF5004 SOL / G Flat Wound .031 0,78 13,4 6,1
Tribute L-2000
Leos L serie basser, startede som en videreførelse af hans Music Man designs, og med to Humbucker pickups tilbød G&L noget på det tidspunkt, som ikke fandtes hos MM. L serien har siden starten fået sit eget liv, og både L-2000, og L-2500 (5 str) er blevet manges favorit bas, og i høj grad en bestseller i Tribute serien.
G&L er Leo Fenders sidste livsværk, skabt på erfaringerne fra Fender og Music Man, og designet i Leo’s workshop, på Fender Avenue 2548, i Fullerton, CA. Stedet hvor de første Music Mans blev bygget, og siden alle G&L USA modeller. Den lille fabrik kører stadig på højtryk, og Leo’s værksted står, som da han forlod det. Tradition og håndværk forenet. Tribute serien er fremstillet hos Cortek i Indonesien, og anvender G&L pickups og hardware!
2 MUDHONEYS IN 1 - DUAL DISTORTION
If you still haven’t heard a T-Rex Mudhoney, do yourself a favour and plug one in next time you’re at the music store.
Dirty and sweet, this classic dual distortion pedal has been praised for its amazing tonal range and ability to deliver everything from a smooth dirty edge to a harrowing wall of distorted sound. It’s one of first pedals we produced, and it set the standard for many T-Rex pedals to come.
Everything that is great about the original Mudhoney – and then doubles it! With two channels of vintage gain, you can easily switch between a clean sound from your amp, a nice edgy overdrive from the one Mudhoney channel and a thick warm distortion from the other channel – delivering deliciously dirty T-Rex tone all the way.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass.
Active Column PA System
2000 W Class D power amplifier
Max. SPL (sound pressure level): 127 dB
Frequency response: +/- 10 dB, 35 - 20,000 Hz
Horn characteristics: 120° x 30°
1" Compression driver with CD horn
6x 3" Midrange speakers
12" Bass speaker in the subwoofer
Various possibilities for setting up the column system by removing or implementing the spacer
4-Channel mixer
24-Bit DSP with 5 storable user presets (Mode, Master EQ, Delay, Display, Bluetooth)
3 Sound modes: Music, Voice, DJ
Adjustable system delay
Backlit LCD display
2 Switchable mic/line inputs: XLR/jack combo
1 Hi-Z Instrument input: Jack
1 Stereo input: RCA
1 Mix output: XLR
Bluetooth 5.0 for audio streaming
Subwoofer housing is made of birch/plywood
Bass dimensions (W x H x D): 36.6 x 67.5 x 54.1 cm
Bass weight: 22.1 kg
Top/Spacer dimensions (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of the top: 3.9 kg
Spacer weight : 2 kg
Total height: 2.18 m
Total weight: 28 kg
100 watts RMS
12" HH Blue 1220200-4 Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
Bass (±12dB), Middle (±12dB) with four switchable voicing options, Treble (±12dB)
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
AUX in
3.5mm Stereo Headphone Jack
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Master Volume
Remote socket for optional FS-1 MINI - switches Drive
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
Active high-performance column PA system
1" Compression driver with CD horn
6x 3" Centre speaker
10" Long excursion sub-woofer
Power: 2000 Watt
Class D power amplifier
Maximum level: 126 dB Peak
Frequency response +/- 10 dB: 38 - 20,000 Hz
Horn characteristic: 120° x 30°
24-Bit DSP with storable 5 User Presets: Mode, Master EQ,Delay, Display, Bluetooth
Modes: 3 Basic settings for Music, Voice and DJ
System delay adjustable
Illuminated LC display
4 Channel mixer
2 Switchable mic/line inputs: XLR/jack combo
1 HiZ instrument input
1 RCA stereo input
1 XLR mix output
Bluetooth 5.0 for audio streaming
Variable column construction with or without spacer element
Sub-woofer cabinet made of birch/multiplex wood
Bass dimensions (W x H x D): 36.6 x 62.5 x 54.1 cm
Bass weight: 21 kg
Dimensions of top/spacer (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of top: 3.9 kg
Weight of spacer: 2 kg
Total height: 2.13 m
Total weight 26.9 kg
Enredo Comienzo serien fra Tanglewood, er fine klassiske guitarer i en yderst fornuftig prisklasse.
Grandæk, samt Ryg og Sider i Lindetræ i mat Satin finish.
Guitarerne har Techwood gribebræt, og gode mekanikker. Et virkeligt godt valg til skoler, begyndere, osv. som vil starte i en god kvalitet
Guitarerne findes i 4/4 størrelse
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
Ukulele Bass BLACK NYLON UXB810® strings are unique strings with a strong consistent sound. This synthetic core string wound with black nylon is a new revolutionary project never introduced before. It changes the way of playing the Ukulele bass, making its sound brighter and more powerful. A truly innovative string with sonority very similar to the timbre of the double bass
DIAMETER TENSION
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB811 G-1st Black Nylon wound on Synthetic core - - - -
UXB812 D-2nd Black Nylon wound on Synthetic core - - - -
UXB813 A-3rd Black Nylon wound on Synthetic core - - - -
UXB814 E-4th Black Nylon wound on Synthetic core - - - -
1-EFFEKT PEDALER
-t.jpg)
