The M4000D Mini Mellotron was developed to meet the needs of keyboardists who want an even smaller and lighter Digital Mellotron. The Mini is also designed to fit perfectly on top of the regular M4000D to make a great looking dual manual Mellotron. Instead of the M4000D’s wooden keyboard, it includes a high-quality, semi-weighted Fatar piano-style keyboard with velocity sensitivity, and mono aftertouch.
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
100 watts RMS
12" HH Blue 1220200-4 Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
Bass (±12dB), Middle (±12dB) with four switchable voicing options, Treble (±12dB)
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
AUX in
3.5mm Stereo Headphone Jack
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Master Volume
Remote socket for optional FS-1 MINI - switches Drive
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
What's In The Box
1 x f5 Snare Microphone
3 x f2 Rack and Floor Tom Microphones
1 x f6 Kick Drum Microphone
2 x f9 Overheads Microphones
6 x DCLIP Microphone Clips
4 x DFLEX Microphone Clips
1 x MC1 Microphone Clip
Aluminum Road Case
Entertainer Keyboard
61 Semi-weighted, velocity-sensitive keys with aftertouch
464 Voices with 3 different sounds each
62 Drum kits and 580 live drums
Dual/Layer
Split
Over 400 styles
4 Nanks with unlimited registrations each
216-Voice polyphonic
7" Touch screen display
15 Sliders with LED indicator
8 Pots
Pitch bend and modulation wheel
Audio and MIDI recording
Audio player with 5+1 multitracks
2 Separate players
Effects: DSP (reverb, chorus, flanger, overdrive, distortion, tremolo, autopan, equaliser, etc.)
3-Voice vocalist for mic input 1
240 GB SSD (80 GB for system)
SD card slot (up to 512 GB)
1 GB user sample memory
Bluetooth audio input
WiFi network connection to Ketron app
Dimensions (W x D x H): 925 x 365 x 125 mm
.REPLICATOR D’LUXE TAPE ECHO
The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making Tape delays.
It is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.
Another pick with the tri-tip design, the Axis is shaped with very rounded tips, making it a favorite for strumming styles and mandolin players. The wide body gives your fingers additional gripping surface, ensuring the pick stays in your hands even during aggressive play. Also, the identical tips frees you from worrying about the pick turning in your hands since there’s another tip waiting to take over right around the corner. These features makes the Axis a dependable pick for the soft strummer or "banger's" alike.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular
NYHED!
ISA C8X
26-in, 28-out USB-C audio interface
BESKRIVELSE SPECIFIKATION
ISA C8X combines the trademark ISA sound with comprehensive remote control and all the analogue and digital I/O, routing, and recallability you need to run your entire setup. The two ISA preamps are based on classic Lundahl transformers and feature all-analogue Console and 430 Air modes for new tonal options plus switchable impedance, balanced inserts, and high-pass filtering. All eight of ISA C8X’s preamps are fully controllable from the front panel and via the Focusrite Control 2 software.
2U rack-mounted, 26x28 USB audio interface
Capture, route, and mix sessions of any size with 26 inputs and 28 outputs of analogue and digital audio.
Two remote-controllable ISA preamps
Featuring Lundahl LL1538 input transformers that add subtle warmth and body to any signal, plus balanced inserts, stepped and fine gain control, switchable impedance, high-pass filter, and up to 79dB of gain.
STRING CLEANER
D’Andrea USA’s String Cleaner & Lubricant prolongs string life and renews string tone by removing the oxidation and natural build up from hours of playing. Simply apply to a polish cloth and gently rub the strings up and down to bring your strings back to life while lubricating them for playing ease. Do not apply to any other surfaces other than your strings. Keep your instruments in tip-top shape with our professional line of Guitar Care Products.. Proudly Made in USA!
Specifications
.500" medium large bore
8" bell
Chrome plated nickel silver inner slides
Lacquered brass finish
2C Blessing mouthpiece
Plush lined hard-shell molded case (C-128)
Made in Usa !
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
The Galli Musical Strings Company was established by Tommaso Galli in 1890. At that time musical strings were handcrafted using gut.
In 1950 Roberto Galli, Tommaso’s son, joined the firm. Roberto inherited the talent of his father and in time became like his father a great expert, a maestro, in the art of musical string making.
In the 1970s Galli Strings introduced new technologically advanced equipment into their production process. Roberto Galli’s son, Tommaso, joined the company in 1985. Building on his grandfather’s and father’s musical and technical achievements, Tommaso Galli has extended into the twenty-first century the Galli tradition of developing and manufacturing fine musical strings.
The world first heard the instantly recognizable sounds of the Mellotron on hits from the Moody Blues (“Nights in White Satin”) and the Beatles (“Strawberry Fields Forever”) in the 1960s. In 2010, Mellotron reintroduced the iconic tape-based machine in a compact digital version, the Mellotron M4000D, that retains the authentic sound, look and feel of the original keyboard while adding some significant improvements.
This trolley was specifically designed to perfectly accommodate the organs of the Legend ’70s. It is compatible with both Compact and Artist-W versions of the instrument, simply use or remove the padded inserts inside the trolley using the Velcro fasteners.
Thanks to its reinforced corners and internal padding, it allows you to safely transport your instrument for any need; in addition to facilitating transportation thanks to the wheels located on one side of the trolley.
External Dimensions (mm) 1450x550x260 | (“) 57×21.65×10.24
Internal Dimensions (mm) 1300x500x190 | (“) 51.18×19.69×7.48
Weight 11.46 lbs/ 5,20 Kg
Burns 50-årsdagen alle Gold Dream-modeller er en speciel model, der er produceret for at fejre 50 års Burns London (1960 til 2010).
Kun 50 stk. Worldwide vil blive lavet af denne 50-årige model som en strengt begrænset udgave. Den har et håndtegnet og nummereret ægthedscertifikat og har de nye Rez-o-Matik® Noiseless ENR-pickups.
Krop og matchende hals i guld metallisk
Ebony Fingerboard med skildpadde kant bindende
22 frets
Gold Hardware med 50 års jubilæum gravering
Låse maskine hoveder
Guld effekt pick-guards
Rez-o-Matik lydløse ENR pickups
Skub pull pickup controls
5-vejs vælgerkontakt
Master volumen
3 x tonekontrol
Låsemøtrikker
Monteret sag
Ægthedscertifikat
Ser.No: 21
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
IBIZA - PROFESSIONAL
Top: Solid Spruce
Neck:Cedar reinforce
Back & Sides: Solid Jacaranda
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent.Case
1-EFFEKT PEDALER
